Sync Plate Plus Expansion

SYNC PLATE

FOR PULSAR & SCOPE SYSTEMS

The professional-standard BNC word clock allows synchronization of multiple devices to a single master clock. Pulsar/SCOPE can operate as either master or slave in such configurations. The Sync Plate also enables Pulsar and SCOPE to operate at sample rates well beyond 96kHz. When used with the SyncPlate, Pulsar/SCOPE systems can run at sample rates of 176.4kHz, 192kHz and even 384kHz - making the system an incredible tool for any cutting edge digital audio configuration.

The ADAT 9-Pin ports permit syn- chronization and control of exter- nal ADAT machines. ADAT timecode is translated to MTC (MIDI Time Code), which can be used to synchronize MIDI sequencing soft- ware or other MIDI gear. Via the Sync Plate, advanced HDR soft- ware (e.g. VDAT, tripleDAT v3.0) can achieve sample word-accurate sync between tape and hard disk.

With the two professional audio interfaces it features, the Sync Plate greatly enhances the possibilities for the use of Pulsar sytems in professional envirionments.

Features

• Word clock and ADAT Timecode synchronization (selectable)
• Operation as synchronization master or slave
• Mounts on PC chassis back panel - no slot used
• Sample rate: 24 kHz - 400 kHz via BNC word clock

Timecode

/

• ADAT 9-Pin connector input and output

Synchronization

• Word clock BNC 75 12 , input and output

Made in Germany CE

System Requirements:

• Installed Pulsar system version 1.1 or higher or
• SCOPE system (v1.2 or higher)

MAP (Minimum Advertised Price) in force. CALL!