AMBER Active Sub - Individual

AMBER Active Sub - Individual

active Sub-Woofer & LF-unit with 10" dual coil driver

long excursion driver +/- 20mm
4 amplifier control one woofer
3 XLR In's and 3 Out's (filtered, or woofer bypassed)
Amplifier section removeable
Cabinet sizes matches with PINK tv, WHITE tv and GREEN tv models

We have designed this monitor for everyone that loves to have the most detailed precision possible, while mixing, editing and/or mastering! Only highest quality components - like the 18cm Carbon/Paper woofer, and the unusual 28mm silk dome - are used to reach a perfectly matched system. In any combination of 2 - 6 channel systems we garanty a max pair difference of +- 0,5 dB A very extreme design feature to the violett HR is the very, very low x-over frequency of 1.200 Hz. We always try to go as low as possible in a two way system, because all woofers with a diameter over 10cm allready "break up" (uncontrolled polarity pattern) very early (1 kHz). A perfect system for all applications within a listening distance from 80 to 300cm

the systemr

The cabinet construction uses the bassreflex principle, the 28mm silk dome driver is mounted from the back of the front, leading into a radial wave guide. This guranties a perfect pattern, low distortion and smooth linearity over a wide range. The "liquid" front design (srew-, bumps-, dipless) support all the eminated enegie without disturbance.

driver technologie

As woofer/midrange driver we use a modified carbon-paper membrane driver of europes leading high Q driver manufacturer. It's the most non coloring chassis we ever had in hand, because a woofer that has to be still perfect at 1 kHz is quite a challenge! The most critical part in the VIOLETT's are the tweeters, these little drivers have to generate frequencies lower than 1,2 kHz!! We found only two companies who are able to design such - and we chose - for sure - the best one!

the electronics

Two complete separated channel stripes are used to keep the electronic crosstalk to a minimum Each of these have identical amplifier - this means the tweeter has the same amount of power in the back as the woofer. A design feature that we never want to miss, because distortion created by different designs or varying power output is not what we want! Our s.c. "quick delivery" - digital power- supplies is build with the same goal in mind it works 2.000 times faster as analog one's and are way less heavy in weight. On the back you will find 16 step dips for the input sensitivity, for low fc control (-6 to + 4 dB), and the hf-section (-4 to +4 dB.

System	AMBER
construction	bass-reflex
concept	long excursion woofer - active
fc response free field	42 - 2.000 Hz +/- 8 dB
fc response filtered	42 - 80/150 Hz +/- 1,5 dB
system low fc response	39 Hz - 3 dB
max. sensitivity	111 dB
max. sensitivity long term	108 dB
harmonic distortion at SPL <100Hz	0,8 %
harmonic distortion at SPL >100Hz	0,4 %
Bass driver	1 x 10" Paper/Fiberglas
Midrange driver	-
Hf driver	-
shielded (anti magnetic)	-
weight	22,4 Kg
dimensions w/h/d in mm	290 x 420 x 400 mm
pair difference	-
Electronic	AMBER
number of amplifier	4
power handling rms Lf/Hf	4 x 80 W
power handling peak Lf/Hf	4 x 90 W
connector type	3 XLR (female)/ 3 XLR (male)
input impedance	10 kOhm
input sensitivity	16 steps, from 0,45 - 4,5V
X-over fc	off / 80 / 150 Hz
low pass filter	15 Hz / - 18dB
polarity control	2 steps, in phase - out of phase
phase control	5 steps, from 30 - 150 degree
distortion at acoustic max. output	0,1%
signal to noise ratio	-100 dB
kind of power supply	analog
operating voltage	115/230 V +/- 20%
power consumtion at max. output	360 W

used for:

RECORDING
PROJECT STUDIO
FILM/VIDEO Editing
MASTERING
SOUND-Design

extends fc- responce and acoustic output of our 2 way systems./ used as .1 channel in 5.1 SURROUND SOUND systems

Stock#: 23559
Maker: EMES
Code: EMES-9A
Platform: *
Type: Monitor
Weight (lbs): 49.28
Dim: 11.42 (W) x 16.54 (H) x 16 (D) inchs
Year: 2002
List: 2,449.00
Sale: $1,949.00

MAP (Minimum Advertised Price) in force. CALL!

Other Hardware Products by this company

MIDI Classics®, Box 311, Weatogue, CT 06089-0311 USA
Order: 800-787-6434 Fax: 860-651-4373 Overseas/Tech Support: 860-651-1349
E-mail:mcsales@midi-classics.com