Hammerfall HDSP 9652

The HDSP 9652's Secure BIOS Technology allows to perform hardware updates via software/driver without any risk. And thanks to its unique 'Zero CPU Load' technology Hammerfall DSP guarantees highest performance and lowest latency on both notebooks and desktops!

Hammerfall also supports Expansion Boards (EXB). Two internal ADAT inputs and two internal ADAT outputs allow you to realize up to 16 analog inputs, 16 analog outputs, or up to two TDIF ports directly inside the computer.

• 3 x ADAT digital I/O, based on RME's reliable Bitclock PLL
• 1 x SPDIF digital I/O, based on RME's reliable DIGI96 technology
• 1 x Breakout cable for coaxial SPDIF operation
• 1 x Word clock I/O (BNC) on included expansion board
• 1 x ADAT Sync In (9-pin D-type) for sample accurate transfers
• 2 x MIDI I/O, 32 channels high-speed MIDI via breakout cable
• HDSP Meter Bridge: freely scalable level meters, peak- and RMS calculation directly in hardware
• TotalMix: 1352 channel mixer with 40 bit internal resolution
• S/MUX poured in hardware: 12 channels 96 kHz/24 bit for record and playback on ADAT optical

The HammerfallTM DSP System comes with drivers for Windows 98/ME (MME with multi-client operation, ASIO 2.0, GSIF), Windows 2000/XP (full multi-client operation of MME, GSIF and ASIO 2.0) and MacOS (ASIO 2.0).

SETTINGS DIALOG

When working with several digital sources it is not only necessary to know if these are properly locked, but also if they are totally synchronized. RME's exclusive SyncCheck checks all input signals and displays their actual state, and thanks to our new Intelligent Clock Control concept you have all clocks and states under control - with ease.

A display of the time code at the ADAT Sync-In port offers a quick check of the communication between external device and Hammerfall.

TECHNICAL SPECIFICATIONS AND FEATURES

UNIQUE TECHNOLOGIES IN HDSP9652

• AutoSync: Intelligent clock control according to operational mode and present/desired sample rate. Intelligent clock control according to operational mode and present/desired sample rate.
• Bitclock PLL
  The most reliable receiver circuit for ADAT optical signal.
• Dynamic Bus Utilization
  Scalable computer load according to the current usage.
• Enhanced ZLMtm
  Monitoring of the input signal, independent from clock mode and sample rate.
• DIGICheck DSP
  Professional status and level display at lowest CPU load.
• Intelligent Clock Control
  Measurement and display of all incoming and used clocks.
• Latency Fast Change
  Change latency on-the-fly under ASIO, without manual reset or re-boot.
• Secure BIOS Technology
  Automatic BIOS replacement when flash process fails.
• SyncAlignTM
  Surveillance and sample accurate synchronization of all channels.
• SyncCheckTM
  Comparison and display of all input clock status.
• TotalMix
  Mixes all inputs and all outputs on all outputs. Several independent submixes possible.
• Zero Latency Monitoring (ZLMtm): Automatic monitoring of the input signal with zero latency.

MAP (Minimum Advertised Price) in force. CALL!