|
|
|
| Flat Phono Preamp w/ Balanced outputs! |
|
New CTP1000-B Flat Phono Preamp system providing Balanced outputs! This is our 2nd new phono preamp system. It consists of two of our flat preamps, each engineered to provide balanced outputs to your appropriate soundcard. You must use this system only with a soundcard with Balanced inputs such as our ESI Julia sound card. Balanced outputs provide several advantages including even lower levels of noise and higher signal levels. See our discussion of balanced connections here: http://www.tracertek.com/newway/balanced.pdf How about the specs on this breakthrough preamp system?
Model CTP1000-B Mono-block Balanced Output Flat Phono Pre-Amplifier Specifications(Specifications are typical and subject to change without notice)Frequency Response: 10 Hz to 100 KHz, +/- 1 dB @ 2 Volts Peak to Peak Differential Mode Output Maximum Differential Output Voltage Swing: 8.0 Volts Peak to Peak w/ > 8.35 VDC Power Supply Slew Rate: 5 Volts / uSec Voltage Gain: 40 dB Channel Separation between 2 Mono-blocks: > 80 dB (Depends on System Configuration) Total Harmonic Distortion + Noise: < 0.004% @ 1 KHz Signal to Noise Ratio (Referenced to 2.8 Vrms Differential Output, A Weighted): 82 dB Input Terminating Resistance: 47 KOhms Output Impedance: 1 KOhm, Balanced Power Supply Input Voltage Range: 8.35 Volts to 12 Volts DC Power Supply Input Power Requirements: 9 Volt Battery or External 9 Volt DC Source Power Supply Input Current: 3.5 mA @ 9 Volts DC Input, Quiescent Power Supply Input Current Maximum: 14 mA @ 12 Volts DC Power Supply Maximum Input Power: 170 mWatts @ 12 Volts DC How about some more?A flat phono preamp frees us to have uncolored audio coming into our computer. This is a major change in the way we do things, but it's not all. Read on for the rest of the story.
|  |
|
Stock#: 30227 Maker: Tracer Technology Code: CTP1000-B Platform: * Type: Preamp Weight (lbs): 6.00 Year: 2004 List: 229.00 Sale: $179.99
|
  |
Copyright © 1996, 2008 MIDI Classics®, Revised 08/28/2008