|
|
|
| Isopatch panel, rear solder |
Isopatch and Isopatch BantamThe Isopatch and Isopatch Bantam are of similar design having two rows of front-panel jacks with all sockets mounted on two horizontal PCBs that eliminate internal wiring and add extra rigidity to the panel. Jacks are of a fully enclosed design that helps to keep out the contaminants that shorten contact life. Half or full normalizing is available on all vertical pairs by simply bridging 'program pads' on the top PCB with solder. This system means that changes to the normalizing configuration can be made easily and quickly, even after installation. Contact material is phosphor-bronze/beryllium-copper with silver or gold plating. The Isopatch Bantam is also available with solid palladium cross-point switch contacts fitted to silver-plated jack contacts for increased performance.The Isopatch jackfield has two rows of 24, 6.35mm, A-gauge jacks at the front and is available with jack, RCA or direct solder termination. The Isopatch Bantam jackfield has two rows of 48, 4.4mm Bantam jacks at the front arranged in stereo-spaced pairs. It is available with standard or palladium switch contacts with a choice of 25-way D-sub or direct-solder termination at the back. The D-sub version is wired to the Tascam DA88 pattern. A rear connector kit is available comprising 12 line connectors and 12 hoods. One is required for each Isopatch Bantam.
|  |
|
Stock#: 32042 Maker: Signex Code: CPJ48T Platform: * Type: Patch Bay Weight (lbs): 4.00 Dim: 19 (W) x 1¾ (H) x 0 (D) inchs List: 296.00 Sale: $275.95
|
  |
Copyright © 1996, 2008 MIDI Classics®, Revised 01/04/2008