Handheld Audio Analyzer RTA/ SPL/ EQ setting, Phase checker, built-in mic PPAA2
Handheld Audio Analyzer
- Palm-sized, lightweight audio analyzer for all sound engineers
- 31-band spectrum analyzer, SPL meter, and more
- Easy operation with built-in microphone and generator
- EQ setting calculation offers advice for boosting and cutting at the touch of a button
- Serial port interface allows real-time computer operation
- Seven hours of continuous operation with four AA batteries
0.340 Kg; ( 0.750 lb )
The PAA2 is a highly accurate handheld audio analyzer that gives professional sound engineers a rich array of tools, including 31-band real time spectrum analysis, SPL and Line meter, internal noise generator, EQ setting program, microphone calibration and the ability to check speaker phase. All functions and menus can be accessed through a central jog dial, meaning you only need one hand to operate it. The New PAA2 connects instantly to any desktop or laptop computer for easy upload and download of information and settings. This audio assistant comes loaded with handy features like a real-time spectrum analyzer, phase test, cable test, a noise generator, a jog dial, and visible backlight to help you see your progress in dark environments. The PAA2 is a must-have tool for every serious sound engineer.
Features :
- 31-band Real Time Spectrum Analyzer
- Built-in calibrated measurement microphone
- Sound Pressure Level Meter from 30dB~130dB
- Line signal measurement display in dBu, dBV, or Voltage
- A, C weighting or flat
- 3 level range selection for dB SPL and line signal
- Line signal measuring range:
dBu = -50 ~ +40dBu
dBV= -52 ~ +38dBV
Volts = 5mV ~ +80V
- Maximum level display
- Peak hold display
- 4 standard response times: 35ms, 125ms (F), 250ms (M), 1sec (S)
- 10 memories for measurement and 6 for average calculation
- 31-band EQ setting level display (boost/cut)
- 160 x 160 graphic display with back light and contrast adjustment
- Phase checker
- SPL meter Calibration through sound level calibrator (eg: B & K Type 4231)
- Noise generator with pink noise, 1K Hz and polarity test signal, balanced output
- Low power consumption for over 4 hours continuous operation with 4 AA size alkaline batteries (Adapter power supply operation available. When power is used from adapter, it automatically cuts off battery power)
- 3 power modes: (1) Power saving mode: Auto Off- when none of the buttons has been pressed for 15 minutes (2) Manual Off (3) Off
- XLR input and output sockets
- RS232 communication port, for simultaneous operation through laptop or PC
- One CD-ROM with audio test signals and software for PC
"The PAA2 is one of those products that doesn't need flashy gimmicks to sell; its strength lies in its ability to do a variety of useful tasks simply, effective, and to a high standard...In terms of operation, it's a pretty straightforward bit of gear, so not much learning is required."
Sound on Sound
February, 2005
Related Products :
- i7700 ( Dual 30-Band Digital Graphic Equalizer w/ RTA, Feedback Eliminator, Delay, Dynamic Processor )
- i7700D ( Dual 30-Band Digital Graphic Equalizer w/ RTA, Feedback Elimination, Delay, Dynamic Processor )
- i7600 SUPRACURVE ( Dual 30-Band 1/3 Octave Digital Graphic Equalizer with RTA )
- i7600D SUPRACURVE ( Dual 30-Band 1/3 Octave Digital Graphic Equalizer with RTA and Digital Inputs and Outputs )
Direct Computer Connectivity streams digital live stereo audio directly into your Mac or PC for plug-and-play recording and editing through USB or FireWire ports. Direct Computer Connectivity on our mixers will also bring a stereo mix back from the computer to your mixer for simultaneous monitoring.
| 
|
