iRock sets a new standard in lighting effects technology. Featuring
ultra-smooth, dynamic, powerful movements and infinite combinations of
colors & patterns. Advanced lighting technology MSD 250W light source with
excellent optics, rotating gobos and amazing pre-programmed light shows, make the iRock 7S/7B stand out from all other products.
Control
- DMX 512 control channels : 7 channels.
- Custom-designed iLead controller or by any universal DMX controller.
- Setting and addressing : 4 digit blue LED display.
LED display with on/off setting function.
- Data in/out : Locking 3-pin XLR
iSolution operation:
- Consistent DMX configuration enables iRock to be linked with iShow and iMove.
- DMX address can be set remotely by iLead controller. No need to calculate the DMX channels of each fixture in the chain.
- When the DMX signal is off, the lights will switch to Master/Slave mode automatically.
Easy installation, easy addressing, and easy operation.
Pre-programmed function::
- Automatic switching between music trigger or auto trigger mode.
- Master/ Slave mode : i.) No need to designate which unit is master or slave, the first unit in the chain will always act as the master unit.
ii.) Built in dynamic lighting shows for instant operation.
- User friendly Easy Controller: Enjoy many lighting shows at your fingertips. Please refer to the diagram below.
Pan/ Tilt:
- IR-7S - Pan: 180; Tilt: 70
- IR-7B - Pan: 180 Tilt: continuous rotation.
Gobo wheel:
- 7 rotating interchangeable gobos plus open including 4 metal, 2 glass, and 1 effect gobos. Gobo size: outside diameter - 26.8 mm, thickness- 0.2mm copper.
- With gobo shaking effect
Color wheel::
- 9 trapezoid dichroic colors plus white; split colors available.
- Rainbow effect in both directions.
Dimmer/ Shutter:
- 0 - 100% dimmer.
- Independent shutter/ variable speed strobe.
Optics:
- High efficiency optical system.
- High quality optical lens, dichroic colors, and gobos.
- Beam angle : 14 degrees
Construction:
- Heat-resistant industrial PC housing.
- Ultra-smooth, micro-stepping motors.
- Carrying handle and standable feet..
Electrical and Specification:
- Power supply: AC 120V - 60Hz / 230V - 50Hz
- Lamp : MSD 250/2 GY 9.5
- Size : 695 x 340 x 250 mm
- Weight: 15.0 kgs ( 120V ); 12.0 kgs (230V )
| 
|
