Active 8" Near Field Studio Monitor (price per pair)

OVERVIEW

An olefin film is thermally adhered to the surface of the cone to control frequency response and to establish long-term reliability. The center dust cap is made of non wood cellulose material and is also impregnated with resin. Finally, the voice coil is made of super highpurity copper wire to achieve very low distortion: <0.05% THD @50W/6 Ohm.

The 1" soft dome tweeter employs the Fostex UFLC technology (Poly Urethane Film Laminated Cloth). It is both lightweight and highly stable. Both drivers are powered by specifically matched amplifiers - 120 Watts RMS for the woofer and 120 Watts RMS for the tweeter.

MAIN FEATURES

• 8" LF Driver
• Low Distortion (<0.05% THD @50W/6 Ohm)

SPECIFICATIONS

• ACOUSTIC SECTION FREQUENCY RESPONSE Free field +/- 2dB, 50Hz to 20kHz
  Low Freq Cut-off: 40Hz
  High Freq Cut-off: 22kHz
  Low frequency control: +/- 3dB (at 60HZ)
  High frequency control: +/- 3dB (at 5kHZ)
  

• AMPLIFIER SECTION

  High Frequency: 120 Watts
  Low Frequency: 120 Watts
  Distortion: <0.05% THD @ 50W/6 ohm, 20Hz - 20kHz S/N: >90dB, 20Hz - 30kHz
  Slew rate: 10V/uSec
• GENERAL WEIGHT: 32.4 lbs each
  GROSS WEIGHT: 35.7 lbs each
  DIMENSIONS: 10"(W) x 16.125"(H) x 11.8"(D) incl. Heat Sink 10.6"(D) excl. Heat Sink

MAP (Minimum Advertised Price) in force. CALL!