|
|
|
|
| AD 96 |
| The Swissonic AD96 is a professional 4 channel A/D converter. It supports 16, 18, 20 and 24-bit digital output with dithering and psycho-acoustic noise shaping for the lower resolutions. The 4 high CMR analog inputs are fully balanced and have class-A biased multipath input buffers. The digital output signal is provided by two AES/EBU outputs as well as an ADAT optical (ADAT lightpipe) output supporting sample and bit multiplexing for recording super audio on conventional ADAT machines. |
|
| SPECIFICATIONS |
| Sample rates |
| Internal clock: |
44,1 / 48 / 88,2 / 96 kHz |
| External clock: |
42–50, 84–100 kHz |
| Number of channels: |
4 |
| Bit depth selection: |
Uses dithering and psycho-acoustic noise shaping to map the high resolution 24-bit data into 16, 18 or 20-bit formats |
| Analog Inputs |
| Full-scale differential voltage: |
+ 20 dBu / 7,75 Vrms or
+ 8 dBu / 1,94 Vrms jumper selectable |
| Input voltage range: |
> 60 dB (0–1 kHz) |
| Input CMRR: |
6000 Ohm |
| Frequency response |
| Passband: |
2–22100 Hz (FS= 48 Khz) passband scales with sample rate |
| Passband ripple: |
0,01 dB |
| Group delay variation with freq: |
0 linear phase |
| Dynamic performance |
| SNR & dynamic range: |
115 dB (A-weighted) |
| THD+noise: |
-100 dB (@-1 dBFS) |
| THD: |
0,003 % (@-1 dBFS) |
| Inter-chanel phase deviation: |
0,1 degrees |
| Inter-channel isolation: |
-110 dB |
| Channel matching within: |
0,1 dB |
| Word clock input/output |
| Type: |
BNC |
| Signal level: |
TTL |
| Frequency: |
42–50 kHz (x1), 84–100 kHz (x2), 0,75–12,8 MHz or 21,5–25,6 MHz (superclock) |
| Output impedance: |
75 Ohm |
| AES/EBU outputs |
| Type: |
Toslink optical |
| Format: |
8-channel, 24-bit |
| Power supply requirements |
| Input voltage: |
12 V AC (+10/-15 %) |
| Maximum current consumption: |
1,2 A |
| Other information |
| Types: |
Professional or consumer, jumper selectable |
| Connectors: |
XLR |
| Format: |
44 / 48 or 88 / 96 kHz |
| ADAT output |
| Type: |
TOSlink optical |
| Formats: |
4 channel, 24 bits 4 channel, 24 / 96 (altern. samples on different channels), 4 channel, bitsplit, 2 channel, 24 / 96 bitsplit |
| Clocking system: |
All audio data is reclocked to either the internal crystal clock or the very low jitter L/C VCO PLL |
| Clock sources: |
internal, Wordclock |
| Level metering: |
Multi-mode, 16-led bar including overload counter
|
|
|
|
|
| FEATURES |
| High-performace, DVD-compatible, 24/96, 4-channel AD converter with 118 dB SNR and dynamic range |
| Supports 16, 18, 20 and 24 bit outputs, with dithering and psycho-acoustic noise shaping for the lower resolutions |
| Fully balanced, high CMR analog inputs |
| Class-A biased multipath input buffers |
| AES/EBU and ADAT outputs |
| Support for bitpacked/sample packed ADAT formats enables recording of 24/96 data on conventional 16/48 MDMs |
| Wordclock input and output |
| Supports x1, x2 and superclock formats |
| Independent input and output |
| Wordclock format selection |
| High-resolution, multi mode peak level meters |
| Overs counter maintains confidence in the recording quality |
| Front panel settings saved into non-volatile memory |
| Halfrack case, optional 19” rack adapter for 2 halfrack units available |
| Front pannel settings saved in non-volatile memory |
|
